|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Laser-driven programmable non-contact transfer printing of objects onto arbitrary receivers via an active elastomeric microstructured stamp显示文摘Transfer printing, as an important assembly technique, has attracted much attention due to its valuable merits to develop novel forms of electronics such as stretchable inorganic electronics requiring the heterogeneous integration of inorganic materials with soft elastomers. Here, we report on a laser-driven programmable non-contact transfer printing technique via a simple yet robust design of active elastomeric microstructured stamp that features cavities filled with air and embedded under the contacting surface, a micro-patterned surface membrane that encapsulates the air cavities and a metal layer on the inner-cavity surfaces serving as the laser-absorbing layer. The micro-patterned surface membrane can be inflated dynamically to control the interfacial adhesion, which can be switched from strong state to weak state by more than three orders of magnitude by local laser heating of the air in the cavity with a temperature increase below 100℃. Theoretical and experimental studies reveal the fundamental aspects of the design and fabrication of the active elastomeric microstructured stamp and the operation of non-contact transfer printing. Demonstrations in the programmable transfer printing of micro-scale silicon platelets and micro-scale LED chips onto various challenging receivers illustrate the extraordinary capabilities for deterministic assembly that are difficult to address by existing printing schemes, thereby creating engineering opportunities in areas requiring the heterogeneous integration of diverse materials such as curvilinear electronics and Micro LED displays. | Hongyu Luo Chengjun Wang Changhong Linghu Kaixin Yu Chao Wang Jizhou Song | 2020 | National Science Review2020，7，2： | 9 |
| 2 | Relationship between autonomic nervous system function and acute mountain sickness显示文摘Objective: To elucidate the role of the autonomic nervous system (ANS) in acute mountain sickness (AMS) during the initial phase at acute high-altitude exposure. Methods: Ninety-nine healthy sea-level residents rapidly ascended to Tibet plateau (3 675 m altitude) by airplane from Chengdu plain (560 m altitude). ANS function was tested in plain and day 2–4 in Tibet by heart rate variability (HRV), cold pressor test (CPT). AMS was evaluated by clinic symptomatic scores. All subjects were divided into non-AMS group (57, scores≤4) and AMS group (42, scores>4). Results: Compared with non-AMS group, AMS group had higher standard deviation of normal to normal intervals (SDNN), root mean square of delta RR (rMSSD), low-frequency (LF) power, and normalized low-frequency (LFnu) power in plain (P<0.05). After arrival at 3 675 m altitude, AMS group had greater reduction in percentage of delta RR>50 ms(PNN50), rMSSD (P<0.01) and SDNN, LF, total power (TP) (P<0.05). Although no significant differences in the increase of SP and DP during CPT were found between 2 groups in plain, the SP increase during CPT of AMS group was less than non-AMS group (P<0.05) at 3 675 m altitude. AMS symptomatic scores was not only positively correlated with SDNN, rMSSD, LF/HF in plain (P<0.05), but also negatively correlated with HFnu in plain (P<0.05). Conclusion: During the initial high altitude exposure, ANS modulation is generally blunted, but the relatively predominant sympathetic control is enhanced, and this characteristic change of ANS function is positively correlated with the development of AMS. | Long Min Huang Lan Tian Kaixin Yu Shiyong Yu Yang Qin Jun | 2008 | Journal of Medical Colleges of PLA(China)2008，23，5： | 4 |
| 3 | DCGAN Based Spectrum Sensing Data Enhancement for Behavior Recognition in Self-Organized Communication Network显示文摘Communication behavior recognition is an issue with increasingly importance in the antiterrorism and national defense area.However,the sensing data obtained in actual environment is often not sufficient to accurately analyze the communication behavior.Traditional means can hardly utilize the scarce and crude spectrum sensing data captured in a real scene.Thus,communication behavior recognition using raw sensing data under smallsample condition has become a new challenge.In this paper,a data enhanced communication behavior recognition(DECBR)scheme is proposed to meet this challenge.Firstly,a preprocessing method is designed to make the raw spectrum data suitable for the proposed scheme.Then,an adaptive convolutional neural network structure is exploited to carry out communication behavior recognition.Moreover,DCGAN is applied to support data enhancement,which realize communication behavior recognition under small-sample condition.Finally,the scheme is verified by experiments under different data size.The results show that the DECBR scheme can greatly improve the accuracy and efficiency of behavior recognition under smallsample condition. | Kaixin Cheng Lei Zhu Changhua Yao Lu Yu Xinrong Wu Xiang Zheng Lei Wang Fandi Lin | 2021 | China Communications2021，18，11： | 3 |
| 4 | Strong Law of Large Numbers for Weighted Sums of Random Variables and Its Applications in EV Regression Models显示文摘This paper mainly studies the strong convergence properties for weighted sums of extended negatively dependent(END,for short)random variables.Some sufficient conditions to prove the strong law of large numbers for weighted sums of END random variables are provided.In particular,the authors obtain the weighted version of Kolmogorov type strong law of large numbers for END random variables as a product.The results that the authors obtained generalize the corresponding ones for independent random variables and some dependent random variables.As an application,the authors investigate the errors-in-variables(EV,for short)regression models and establish the strong consistency for the least square estimators.Simulation studies are conducted to demonstrate the performance of the proposed procedure and a real example is analysed for illustration. | PENG Yunjie ZHENG Xiaoqian YU Wei HE Kaixin WANG Xuejun | 2022 | Journal of Systems Science & Complexity2022，35，1： | 1 |
| 5 | Synergistic in-situ growth of silver nanoparticles with nanozyme activity for dual-mode biosensing and cancer theranostics显示文摘A multifunctional nanocomposite of AgNPs@GQDs is prepared by synergistic in-situ growth of silver nanoparticles(AgNPs)on the complex of tannic acid(TA)and graphene quantum dots(GQDs)for the construction of dual-mode biosensing platform and cancer theranostics.The nanocomposite exhibits a hydrogen peroxide(H_(2)O_(2))-responsive degradation,in which Ag^(0)is oxidized to Ag^(+)along with the release of oxidized TA and GQDs.The degradation induces the decreased absorbance and enhanced fluorescence(FL)intensity due to the suppression of Forster resonance ene rgy transfer(FRET)in AgNPs@GQDs,which is employed for colorimetric/fluorescence dual-mode sensing of H_(2)O_(2).The intrinsic peroxidase-like activity of GQDs nanozyme can effectively catalyze the oxidation reaction,enhancing the detection sensitivity significantly.Based on the generation of H_(2)O_(2)from the oxidation of glucose with the catalysis of glucose oxidase(GOx),this nanoprobe is versatilely used for the determination of glucose in human serum.Further,through combining the H_(2)O_(2)-responsive degradation of AgNPs@GQDs with high H_(2)O_(2)level in cancer cells,the nanocomposites exhibit good performance in cancer cell recognition and therapy,in which the synergistic anticancer effect of Ag^(+)and oxidized TA contribute to effective cell death,and the liberated GQDs are used to monitor the therapeutic effect by cell imaging. | Xin Hai Yuwei Li Kaixin Yu Shuzhen Yue Yuanfang Li Weiling Song Sai Bi Xueji Zhang | 2021 | Chinese Chemical Letters2021，32，3： | 1 |
| 6 | Mass transfer techniques for large-scaleand high-density microLED arrays显示文摘Inorganic-based micro light-emitting diodes (microLEDs) offer more fascinating properties and unique demands in next-generation displays. However, the small size of the microLED chip (1–100 µm) makes it extremely challenging for high efficiency and low cost to accurately, selectively, integrate millions of microLED chips. Recent impressive technological advances have overcome the drawbacks of traditional pick-and-place techniques when they were utilized in the assembly of microLED display, including the most broadly recognized laser lift-off technique, contact micro-transfer printing (µTP) technique, laser non-contact µTP technique, and self-assembly technique. Herein, we firstly review the key developments in mass transfer technique and highlight their potential value, covering both the state-of-the-art devices and requirements for mass transfer in the assembly of the ultra-large-area display and virtual reality glasses. We begin with the significant challenges and the brief history of mass transfer technique, and expand that mass transfer technique is composed of two major techniques, namely, the epitaxial Lift-off technique and the pick-and-place technique. The basic concept and transfer effects for each representative epitaxial Lift-off and pick-and-place technique in mass transfer are then overviewed separately. Finally, the potential challenges and future research directions of mass transfer are discussed. | Furong Chen Jing Bian Jinlong Hu Ningning Sun Biao Yang Hong Ling Haiyang Yu Kaixin Wang Mengxin Gai Yuhang Ma YongAn Huang | 2022 | International Journal of Extreme Manufacturing2022，4，4： | 1 |
| 7 | Changes of autonomic nervous system function in healthy young men during initial phase at acute high-altitude exposure显示文摘Objective: To investigate the changes of autonomic nervous system (ANS) function during the initial phase at acute high-altitude exposure. Methods: Ninety-nine healthy sea-level male residents were studied in Chengdu plain and then Tibet plateau. Heart rate variability (HRV), cold pressor test (CPT), resting heart rate (HR) and blood pressure (BP) were measured at baseline (560 m altitude) and in 2 to 4 d after arriving at Tibet plateau (3 675 m altitude) to assess the ANS function. Results: Compared with baseline, on day 2 in Tibet the standard deviation of normal to normal intervals (SDNN), high-frequency (HF) power, total power (TP), root mean square of delta RR (rMSSD), percentage of delta RR>50 ms (PNN50), normalized high-frequency (HFnu) and fractal dimension (FD) decreased significantly (SDNN, HF, TP P<0.01, rMSSD, PNN50, HFnu, FD P<0.05), while the normalized low-frequency (LFnu) and LF/HF increased significantly (P<0.01). During day 3–4 in Tibet, SDNN, rMSSD, HF, TP and HFnu tended to rebound while LFnu and LF/HF decreased towards baseline day by day. In addition, in Tibet the increase in systolic pressure (SP) and diastolic pressure (DP) during CPT decreased significantly (P<0.01, 0.05), but resting HR increased compared with baseline (P<0.01). Conclusion: ANS modulation is generally blunted, and the relatively predominant sympathetic control is enhanced originally, then it reverts to the sea level states gradually during the initial days of acute high-altitude exposure. | Qin Jun Huang Lan Tian Kaixin Yu Shiyong Yu Yang Long Min | 2008 | Journal of Medical Colleges of PLA(China)2008，23，5： | 1 |
| 8 | UltrahighQ Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)microwave dielectric ceramics for temperature-stable millimeter-wave dielectric resonator antennas显示文摘Microwave dielectric ceramics should be improved to advance mobile communication technologies further.In this study,we prepared Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics with nonstoichiometric Sr^(2+)ratios based on our previously reported SrY_(2)O_(4) microwave dielectric ceramic,which has a low dielectric constant and an ultrahigh quality factor(Q value).The ceramic exhibited a 33.6% higher Q-by-frequency(Q×f)value(Q≈12,500)at x=0.02 than SrY_(2)O_(4).All Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics exhibited pure phase structures,although variations in crystal-plane spacings were observed.The ceramics are mainly composed of Sr-O,Y1-O,and Y_(2)-O octahedra,with the temperature coefficient of the resonant frequency(τ_(f))of the ceramic increasing with Y_(2)-O octahedral distortion.The ceramic comprises uniform grains with a homogeneous elemental distribution,clear grain boundaries,and no obvious cavities at x=0.02.The Sr_(1+x)Y_(2)O_(4+x)(x=0-0.04)ceramics exhibited good microwave dielectric properties,with optimal performance observed at x=0.02(dielectric constant(εr)=15.41,Q×f=112,375 GHz,and τ_(f)=-17.44 ppm/℃).The τ_(f) value was reduced to meet the temperaturestability requirements of 5G/6G communication systems by adding CaTiO_(3),with Sr_(1.02)Y_(2)O_(4.02)+2wt% CaTiO_(3) exhibiting ε_(r)=16.14,Q×f=51,004 GHz,andτf=0 ppm/℃.A dielectric resonator antenna prepared using Sr_(1.02)Y_(2)O_(4.02)+2wt%CaTiO_(3) exhibited a central frequency of 26.6 GHz,with a corresponding gain and efficiency of 3.66 dBi and 83.14%,respectively.Consequently,Sr_(1.02)Y_(2)O_(4).02-based dielectric resonator antennas are suitable for use in 5G millimeter-wave band(24.5-27.5 GHz)applications. | Guoqiang He Yu Jiang Kaixin Song Yanjun Liu Yuan Nie Wenjie Zhang Ziqi Zhao Yinghan He Xinyue Ma Xiuli Chen Xu Li Huanfu Zhou | 2024 | Journal of Advanced Ceramics2024，13，2： | 0 |
| 9 | Laser projection proximity transfer for deterministic assembly of microchip arrays at scale显示文摘Deterministic assembly techniques that enable programmatic and massively parallel integration of chips are essential for the development of novel electronic systems such as micro LED displays.However,large-area integration of ultrathin micro-chips with high yield and transfer accuracy remains a great challenge due to the difficulties in selective transfer,adhesion switchability,and transfer deviation.Here,a“laser projection proximity transfer(Laser PPT)”technique is presented for the deterministic assembly of microchip arrays at scale.One of the remarkable features is that the transfer status between the chip and the receiver substrate evolves from the original non-contact mode to contact mode for high-precision transfer,which overcomes the strict requirements of the flatness of stamp and substrate in contact-style transfer,and flight deviation of microchip array in noncontact-style transfer.Another feature is the rapid modulation of interfacial adhesion for reliable transfer via the use of thermally expandable microspheres to form microstructures and combining with a laser-induced blister.The adhesion regulation range is over 20 times without any damage to chip arrays.The results show that the transfer accuracy has been improved substantially with a minimum relative error of~0.5%.Combined with a laser beam projection system,demonstrations of Laser PPT for selective assembly of fragile objects onto challenging non-adhesive/cured surfaces in batch illustrate its potential in the highprecision integration of microscale chips at scale. | HU JinLong CHEN FuRong BIAN Jing SUN NingNing WANG KaiXin LING Hong YU HaiYang GAI MengXin XU LiZhi HUANG YongAn | 2022 | Science China(Technological Sciences)2022，65，9： | 0 |
| 10 | An ultralight geometry processing library for parallel mesh refinement显示文摘In applications such as parallel mesh refinement,it remains a challenging issue to ensure the refined surface respects the original Computer-Aided Design(CAD)model accurately.In this paper,an ultralight geometry processing library is developed to resolve this issue effectively and efficiently.Here,we say the kernel is ultralight because it has a very small set of data-structures and algorithms by comparison with industrial-level geometry kernels.Within the library,a simplified surface boundary representation(B-rep)and a radial edge structure are developed respectively to depict the geometry model and the surface mesh,plus hash tables that record the connections between the geometry model and the surface mesh.Based on these data structures,a set of efficient algorithms are developed,which initializes the connection tables,projects a point back to the original geometry,etc.With these data-structure and algorithmic infrastructures set up,the callings of eight well-designed Application Programming Interfaces(APIs)are powerful enough to enable the parallel mesh refinement algorithm outputs a mesh respecting the input CAD model accurately.Numerical experiments will be finally presented to evaluate the performance of the overall parallel mesh refinement algorithm and the algorithms in relation with the developed library. | Bohan Wang Bo Chen Kaixin Yu Lijun Xie Jianjun Chen | 2022 | Advances in Aerodynamics2022，4，1： | 0 |
| 11 | Reprogramming the endogenous type I CRISPR-Cas system for simultaneous gene regulation and editing in Haloarcula hispanica显示文摘The type I system is the most widely distributed CRISPR-Cas system identified so far.Recently,we have revealed the natural reprogramming of the type I CRISPR effector for gene regulation with a crRNA-resembling RNA in halophilic archaea.Here,we conducted a comprehensive study of the impact of redesigned crRNAs with different spacer lengths on gene regulation with the native type I-B CRISPR system in Haloarcula hispanica.When the spacer targeting the chromosomal gene was shortened from 36 to 28 bp,transformation efficiencies of the spacer-encoding plasmids were improved by over three orders of magnitude,indicating a significant loss of interference.However,by conducting whole-genome sequencing and measuring the growth curves of the hosts,we still detected DNA cleavage and its influence on cell growth.Intriguingly,when the spacer was shortened to 24 bp,the transcription of the target gene was downregulated to 10.80%,while both interference and primed adaptation disappeared.By modifying the lengths of the spacers,the expression of the target gene could be suppressed to varying degrees.Significantly,by designing crRNAs with different spacer lengths and targeting different genes,we achieved simultaneous gene editing(cdc6E)and gene regulation(crtB)for the first time with the endogenous type I CRISPR-Cas system. | Kaixin Du Luyao Gong Ming Li Haiying Yu Hua Xiang | 2022 | mLife2022，1，1： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员